9-cam is live streaming tool that connect to USB cam on your pc. Only PC(Windows OS) that connected to internet and USB cam is required, no other devices required.(USB Cam, security, surveillance)
- Cam List
- Live Stream from USB Cam on your PC
- Motion Detection and Push notification (motion detected still image cut also saved on your pc)
- Motion Detection Sensitivity Selection
- Push Alarm Duration Selection
1. Please, follow the below steps to run 9-cam service.
Download 9-cam server program. (http://goo.gl/aqZYJ)
2. Install 9-cam server program.
3. Connect your USB Cam to PC that running 9-Cam server program (USB Cam driver should have been installed)
The Firewall configuration of the PC that running 9-Cam server should not block the port number of 9-Cam server.
4. Please, config the Filrewall setting of your PC.
5. Run 9-cam server program.
6. Set the environments. (cam name , password, port number - refer to below port forwarding section)
When your PC IP address is not public and connected to the internet through AP(Access Point) your should set Port Forwarding of your AP environment.
The port of 9-cam server port number should be forwarded. Details, refer to your AP manual.
observation, watch, cam, security